Grease Trap.                 
Acid neutralising tank.
Cooling & Straining tank.
Food triple interceptor.
Grease trap.

Mixing tank.
Paint settling tank.
Petrol triple interceptor.

Plastic tank gallery.
Pump tank.

Settling tank.
Solvent triple interceptor.
Trade waste tank.
Triple interceptor.

Silt pit.
Silt trap.
600lt Grease Trap
250lt Grease Trap 1000lt Grease Trap & Cover
2000lt Grease Trap
1000lt Grease Trap & Cover
HOME CONTACT
Grease Traps.

Grease traps are required in commercial food preparation areas.

The function of a grease trap is to slow the flow of Warm/hot greasy water thus allowing it to cool.
As the water cools, the grease and oil separate and float to the top, solids to settle on the bottom of the grease trap tank and the cleaner/cooler water flows out to sewer.

Above Ground grease trap.

250lt Grease Trap

600lt Grease Trap

 

2000lt Grease Trap




VP9-2

  • Manufactured from PVC and Polypropylene materials, this grease trap tank is suitable for above-ground installations only
  • Standard grease trap tanks are fitted with 100mm nb. Inlet and Outlet pipe and 50mm Vent
  • Cirular screw-down access covers are fitted to a top lid that is screw fixed to the grease trap tank flange
  • Grease trap tank dimensions and pipework positions are nominal and in all cases conform to Trade Waste recommendations
  • When space limitations dictate, equivalent capacity grease trap tanks can be manufactured to order
  • *Note: Grease trap tanks larger than 250 litres capacity have external bracing fitted. Allow 50mm all round



Downloads

  • Grease Traps Above Ground.

  • Below Ground grease trap.

    1000lt Grease Trap & Cover (cover sold separately)

    1000lt Grease Trap & Cover


    VP9-1

    • Manufactured from PVC and Polypropylene materials, this grease trap tank is suitable for below-ground installations
    • The grease trap tank must be surrounded with 100mm thick concrete walls and base
    • Standard grease trap tanks are fitted with 100mm nb. Inlet, Outlet and Vent pipes
    • Access covers (supplied separately) capable of being removed by one man should be fitted on top
    • Grease trap tank dimensions and pipework positions are nominal and in all cases conform to Trade Waste recommendations
    • When space limitations dictate, equivalent capacity grease trap tanks can be manufactured to order






    Downloads

  • Grease Traps Below Ground.
  • Copyright © Viking Plastics Pty. Ltd. | All Rights Reserved

     
    Viking Plastics Pty. Ltd. 143 Woodlands Drive, Braeside, Victoria, 3195

    Contact Us